• Votre panier est vide !

MXR M239 MINI ISO-BRICK Power Supply

  • -20% MXR M239 MINI ISO-BRICK Power Supply
  • Fabricant : MXR
  • Modèle : M239
  • Prix spécial:

    108,63€

    Ancien prix:

    135,79€

    Vous enregistrez:

    20%

  • H.T : 89,04€
    • Prix le plus bas 30 derniers jours: 108,63€
Disponibilité : En Stock
Afficher la disponibilité par magasin
Spécifications: All 5 outputs are completely isolated
Specifications II: Separate status LED for each output
Specifications III: 1x Output with selectable voltage (9V/18V) loadable with 800 mA
Caractéristiques: 4x 9 V Outputs, each with 300 mA
Features II: all positive barrel negative center 5.5mm x 2.1mm
Features III: Input voltage: 18V DC 2,000 mA
Accessoires: Connect included AC adapter into M239’s 18V INPUT jack.

MXR® MINI ISO-BRICK™ POWER SUPPLY
M239
Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need—all while taking up less space than a candy bar.

The Mini Iso-Brick Power Supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need.

First, let’s talk outputs. The Mini Iso-Brick Power Supply has five, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital.

And don’t let the five outputs restrict you—if you need to add an extra pedal, the Mini Iso-Brick Power Supply has you covered. It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don’t exceed the output’s current rating. You can do this with all of the outputs simultaneously—just purchase the extra cables to do so.

Finally, troubleshooting can be a hassle on dark stages, so the Mini Iso-Brick Power Supply comes equipped with LEDs to let you know that all your connections are solid. Combine that with a lightweight housing that's built like a tank, and you can step on stage with confidence that your pedalboard will stay powered from gig to gig.

MXR M 239 Mini Iso-Brick; multi power supply for effects pedals; total current output of 2,000 mA; all 5 outputs completely isolated; separate status LED for each output; 4 x 9V DC outputs; each with 300 mA; 1 x selectable voltage (9V / 18V) DC output; with 800 mA; input voltage 18V DC 2.000 mA; aluminum housing; incl. 5 x power cables; angle/straight 2.1 x 5.5 mm barrel plug; incl. 1 x power splitter cable; 2.1 x 5.5 mm barrel plug; incl. 18V DC 2.000 mA power adapter (Dunlop ECB 009) 2.1 x 5.5 mm barrel plug; polarity (-) center


Item No.: M239

Écrire un avis

Note : Le HTML n’est pas pris en charge !
    Mauvais           Bon